december 2016 docid030064 rev 1 1 / 4 for further information contact your local stmicroelectronics sales office www.st.com x - nucleo - ihm13a1 low voltage brush dc motor driver expansion board for stm32 nucleo based on the stspin250 data brief features ? low voltage range from 1.8 v to 10 v ? current up to 2.6 a r.m.s. ? current control with adjustable off - time ? full overcurrent and short circuit protection ? thermal shutdown ? compatible with arduino uno r3 connector ? compatible with stm32 nucleo boards ? rohs compliant d escription the x - nucleo - ihm13a1 expansion board for stm32 nucleo is based on the stspin250 low voltage brush dc motor driver. it provides an affordable and easy - to - use solution for the implementation of portable motor driving applications such as thermal prin ters, robotics and toys. the x - nucleo - ihm13a1 is compatible with the arduino uno r3 connector and most stm32 nucleo boards.
schematic diagram x - nucleo - ihm13a1 2 / 4 docid030064 rev 1 1 schematic diagram figure 1 : x - nucleo - ihm13a1 circuit schematic
x - nucleo - ihm13a1 revision history docid030064 rev 1 3 / 4 2 revision history table 1: document revision history date version changes 05 - dec - 2016 1 initial release.
x - nucleo - ihm13a1 4 / 4 docid030064 rev 1 important notice C please read carefully stmicroelectronics nv and its subsidiaries (st) reserve the right to make changes, corrections, enhancements, modifications , and improvements to st products and/or to this document at any time without notice. pu rchasers should obtain the latest relevant information on st products before placing orders. st products are sold pursuant to sts terms and conditions of sale in place at the time of or der acknowledgement. purchasers are solely responsible for the choi ce, selection, and use of st products and st assumes no liability for application assistance or the design of purchasers products. no license, express or implied, to any intellectual property right is granted by st herein. resale of st products with p rovisions different from the information set forth herein shall void any warranty granted by st for such product. st and the st logo are trademarks of st. all other product or service names are the property of their respective owners. information in this document supersedes and replaces information previously supplied in any prior versions of this document. ? 2016 stmicroelectronics C all rights reserved
|
